Patriotic Table Tent Card

Pin It

My friend Meighen over at Scrappin' 3rdeeschick asked me to be her guest designer on her blog and the Table Tent Card below is what I shared.  Drop over to her blog and say hello!  She has a Beach Blog Hop going on right now you'll enjoy.

Here's how I made it:
-Fold 8-1/2" x 11" red cs in half, lengthwise. Set aside.
-Cut your white cs at 3-1/2" x 10". You'll stamp on this.
-Stamp your background image "We the people" with red inkpad.
  I had to stamp it 3 times to fill up the white cs. See close up
  on photo#2.
-Ink all the edges of white cs with sand beige inkpad.
-With Graphically Speaking Cricut cartridge, cut  "freedom"on
  navy  blue cs: key 16, type, 1-1/2".
-With A Child's Year Cricut cartridge, cut "kids/flag" on navy
  blue cs: key 18, shift, 3".
-With pop dots, adhere the "kids" to left side of cs as per photo.
-With tape runner, adhere the words "freedom" to the right side
  of the kids.
-Now we will adhere the stamped white cs to the red cs.
-With red inkpad, stamp the "star" image on a metal-rimmed tag.
  Thread twine thru hole and adhere just under the letter "M".
  See photo #3.

Photo #2

Photo #3

Here's what I used to make this:

Stamps:  Various patriotic stamps. Email me if you want to know

              the company name on any of these.

Ink:  Memento paris blue; Distress Inks - fired brick and  old

        paper;  Versacolor Sand Beige

Cricut Cartridges:  Graphically Speaking; A Child's Year

BACK SIDE Patriotic Table Tent Card:

This side is just as easy and fun to make! 

Here's how I made this:

-With Old Paper brown ink, stamp "We the people" image at an
  angle to fill the  3-1/2 x 10" white cs.  See close-up photo #2.

-On top of this you will stamp with blue inkpad the flag, the bell,
  the eagle,  statue of liberty and fireworks as per photo.
-With sand beige inkpad, ink all the edges of the white cs.

-With Graphically Speaking Cricut cartridge, cut the 3 red "stars":
  key 16, icon blackout, 1-1/2" .
-Pop-dot stars and place on white cs as per photo.
-With same Cricut cartridge, cut "usa" : key 16, 1-1/4".
-Pop-dot usa and place it in betweenthe bell and statue of liberty.-Adhere completed stamped white cs to red cardfront.

-Wrap twine around the card a few times to the  top of card and tie small bow. 

Photo # 2

Photo #3

Here's what I used to make this:

Stamps:  Various patriotic stamps. Email me if you want to know

              the company name on any of these.

Ink:  Memento paris blue; Distress Inks - fired brick; old

        paper; Versacolor sand beige.

Cricut Cartridge:  Graphically Speaking

That's it!  Your two-sided Patriotic Table Tent card is now ready to be used. If you wanted to dress it up more, you could add stars to the top of the tent card similar to these that are on this altered paint can:

Well, thanks for your time.  I am believing you enjoyed this post.  Any questions, email me.  You can find other patriotic things at my Paper Blessings Etsy shop.  I will be posting some other patriotic fun projects later this week.
Thanks again.  Remember to enjoy every single minute of your day!